Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER SYSTEM
RM37H0E _59 Vehicle Exterior _095305 WINDOW / GLASS _0453654 WINDOW DEFOGGER SYSTEM D

WINDOW / GLASS  WINDOW DEFOGGER SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

The window defogger wires are attached to the inside of the back window assembly and defog the window surface quickly when the window defogger switch on the air conditioning control assembly is pressed. The indicator light illuminates while the system is operating. The system automatically turns off after approximately 15 minutes.

NOTICE:

If the windshield deicer system is operated when the auxiliary battery voltage is low, due to the electrical load limit control that gives voltage supply priority to the power steering system, the windshield deicer system may not operate. In this case, check the vehicle control history of the power steering system and check that "Battery Voltage Drop: X208F" is not stored before proceeding with troubleshooting.

Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>VEHICLE CONTROL HISTORY




FUNCTION OF MAIN COMPONENT


Component Outline
Air Conditioning Control Assembly (Window Defogger Switch) Sends signals to the air conditioning amplifier assembly to operate the window defogger system.
Air Conditioning Amplifier Assembly Sends the window defogger switch signal from the air conditioning control assembly to the main body ECU (multiplex network body ECU).
Main Body ECU (Multiplex Network Body ECU) Sends the window defogger switch signal from the air conditioning amplifier assembly to the No. 2 semiconductor power integration ECU.
No. 2 Semiconductor Power Integration ECU Heats the window defogger wire according to the window defogger switch signal sent from the main body ECU (multiplex network body ECU).
Back Window Assembly (Window Defogger Wire) The window defogger wire is heated according to air conditioning amplifier assembly control.