CHECK WINDSHIELD DEICER SYSTEM
If the windshield deicer system is operated when the auxiliary battery voltage is low, due to the electrical load limit control that gives voltage supply priority to the power steering system, the windshield deicer system may not operate. In this case, check the vehicle control history of the power steering system and check that "Battery Voltage Drop: X208F" is not stored before proceeding with troubleshooting.
Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>VEHICLE CONTROL HISTORY
Turn the ignition switch to ON and the front wiper deicer switch is pressed, check that the windshield deicer operates.
After waiting approximately 15 minutes, check that the windshield deicer automatically turns off.