Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › REAR SPEED SENSOR
RM37H0E _54 Brake _096746 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0454014 REAR SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  REAR SPEED SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
C446176N02
4.583,2.875 5,2.875 false 4.083,4.583 4.5,4.583 false 4.417,2.75 4.75,3.167 0.333,0.417 18 false 2 3.917,4.469 4.25,4.885 0.333,0.417 18 false 1

Procedure Part Name Code
Z101186

Z101188

Z101187

1 REAR WHEEL - - - -
2 REAR SPEED SENSOR LH 89546 (Click here) - -

CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 89546 2.REMOVE REAR SPEED SENSOR LH

Z101186

NOTICE:
·

Remove any dirt or foreign matter on and around the connector before performing this step.

·

Do not allow water, oil or dirt to enter the connector.

·

Be careful not to damage the rear speed sensor or connector.

·

The rear speed sensor is easily damaged. When pulling out the rear speed sensor from the rear axle hub LH, do not use excessive force to rotate and remove it.

·

Prevent foreign matter from attaching to the sensor tip.

·

Do not drop the sensor. If the sensor has been dropped, replace the sensor with a new one.




a.
C446178