| *1 | OUTER MIRROR TAPE | *2 | CONNECTOR CLAMP |
| *3 | VISOR COVER A | *4 | VISOR COVER B |
| ● | Non-reusable part | - | - |
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
867A2A
1.INSTALL PARKING ASSIST LIGHT LH
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Install the parking assist light LH with the 2 screws.
Connect the connector.
Attach the claw to install the connector clamp to connector.
Paste the outer mirror tape around the connector clamp.
2.INSTALL NO. 2 OUTER MIRROR COVER LH
4. OUTER REAR VIEW MIRROR OPERATION
86790F
5.ADJUST SIDE TELEVISION CAMERA ASSEMBLY LH