Use the following procedure to troubleshoot the air conditioning system.
*: Use the GTS.
| Proceed to |
|---|
| NEXT |
NEXT
In troubleshooting, in order to check the problem symptoms accurately and judge correctly, avoid having any preconceptions. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
Gather as much information as possible for reference. Past malfunctions that seem unrelated may also help in some cases.
The following 5 items are important points for problem analysis:
| What | Vehicle model, system name |
| When | Date and time, frequency, whether the problem occurred recently or has been occurring for a long time |
| Where | Whether the problem occurs at specified place |
| Under what conditions? | Whether the doors were locked or unlocked, whether the ignition switch was to ON, whether the engine was running |
| How did it happen? | Ask the customer for details about the vehicle operating conditions, environment and malfunction. |
| Proceed to |
|---|
| NEXT |
NEXT
Inspect the auxiliary battery voltage with the ignition switch off.
11 to 14 V
A simple method to determine whether the auxiliary battery is depleted is to operate the horn.
If the auxiliary voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
Check the fuses and relays.
Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.
| Proceed to |
|---|
| NEXT |
NEXT
Using the GTS, check for CAN communication system DTCs.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
| Result | Proceed to |
|---|---|
| CAN communication system DTCs are not output | A |
| CAN communication system DTCs are output | B |
A
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Using the GTS, check for LIN communication system DTCs.
| Result | Proceed to |
|---|---|
| LIN communication system DTCs are not output | A |
| LIN communication system DTCs are output | B |
A
B
Using the GTS, check for CXPI communication system DTCs.
| Result | Proceed to |
|---|---|
| CXPI communication system DTCs are not output | A |
| CXPI communication system DTCs are output | B |
A
B
Using the GTS, check for power integration system DTCs.
| Result | Proceed to |
|---|---|
| Power integration system DTCs are not output | A |
| Power integration system DTCs are output | B |
A
B
Click herePower Source / Network>POWER DISTRIBUTION>POWER INTEGRATION SYSTEM>DIAGNOSTIC TROUBLE CODE CHART
Check for DTCs and note any codes that are output.
Clear the DTCs.
Recheck for DTCs. Based on the DTCs output above, try to force output of the air conditioning system DTC by simulating the operation indicated by the DTC.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
A
B
Check for DTCs and note any codes that are output.
Clear the DTCs.
Recheck for DTCs. Based on the DTCs output above, try to force output of the air conditioning system DTC by simulating the operation indicated by the DTC.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
A
B
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>DIAGNOSTIC TROUBLE CODE CHART
Operate each switch on the air conditioning control assembly to check that the air conditioning system operates normally.
Operate each switch on the cooler control switch assembly to check that the air conditioning system operates normally (for 3 Zone).
| Result | Proceed to |
|---|---|
| Air conditioning system operates normally | A |
| Air conditioning system does not operate normally | B |
A
B
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>PROBLEM SYMPTOMS TABLE
Operate the blower switch on the air conditioning control assembly to check that the blower function is controlled normally.
Operate the blower switch on the cooler control switch assembly to check that the blower function is controlled normally (for 3 Zone).
| Result | Proceed to |
|---|---|
| Blower function is controlled normally | A |
| Blower function is not controlled normally | B |
A
B
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>PROBLEM SYMPTOMS TABLE
Operate the fresh/recirculation switch on the air conditioning control assembly to check that the fresh/recirculation control function is controlled normally.
| Result | Proceed to |
|---|---|
| Fresh/recirculation control function is controlled normally | A |
| Fresh/recirculation control function is not controlled normally | B |
A
B
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>PROBLEM SYMPTOMS TABLE
Operate the MODE switch on the air conditioning control assembly to check that the air outlet changing function is controlled normally.
Operate the MODE switch on the cooler control switch assembly to check that the air outlet changing function is controlled normally (for 3 Zone).
| Result | Proceed to |
|---|---|
| Air outlet changing function is controlled normally | A |
| Air outlet changing function is not controlled normally | B |
A
B
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>PROBLEM SYMPTOMS TABLE
Operate the A/C switch and temperature adjustment switch on the on the air conditioning control assembly to check that the cooling performance is controlled normally.
Operate the on the cooler control switch assembly to check that the cooling performance is controlled normally (for 3 Zone).
| Result | Proceed to |
|---|---|
| Cooling performance is controlled normally | A |
| Cooling performance is not controlled normally | B |
A
B
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>PROBLEM SYMPTOMS TABLE
Operate the A/C switch and temperature adjustment switch on the air conditioning control assembly to check that the heating performance is controlled normally.
Operate the temperature adjustment switch on the cooler control assembly to check that the heating performance is controlled normally (for 3 Zone).
| Result | Proceed to |
|---|---|
| Heating performance is controlled normally | A |
| Heating performance is not controlled normally | B |
A
B
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>PROBLEM SYMPTOMS TABLE
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT
| Proceed to |
|---|
| NEXT |
NEXT