| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | REAR BUMPER ASSEMBLY | - | - | - | - |
| 2 | REAR FOG LIGHT LENS AND BODY | 81457C | - | - | - |
| 3 | FOG LIGHT PROTECTOR | 81483A | - | - | - |
| 4 | REAR FOG LIGHT BRACKET | 81481K | - | - | - |
| *1 | Body | *2 | Lens |
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the rear fog light lens and body removal/installation are shown below.
1.REMOVE REAR BUMPER ASSEMBLY
81457C
2.REMOVE REAR FOG LIGHT LENS AND BODY
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
|
Screw |
|
Connector |
81483A
3.REMOVE FOG LIGHT PROTECTOR
|
Remove in this Direction | - | - |
81481K
4.REMOVE REAR FOG LIGHT BRACKET
|
Remove in this Direction | - | - |