Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE
RM37H0E _59 Vehicle Exterior _095315 EXTERIOR PANELS / TRIM _0448284 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
B604646N01
4.635,3.094 4.385,3.094 false 3.698,1 3.938,0.542 3.938,0.542 5.052,0.542 true 6.177,2.208 6.063,2.458 6.063,2.458 5.677,2.458 true 2,1.688 2.75,1.688 2.75,1.688 2.896,1.51 true 0.948,2.219 1.042,2.469 1.042,2.469 1.438,2.469 true 1.958,1.25 2.708,1.25 2.708,1.25 2.875,1.417 true 6.24,4 5.885,4 false 1.417,3.99 1.073,3.99 false 5.031,4.49 4.677,4.49 false 5.375,1.677 4.49,1.677 4.49,1.677 4.375,1.5 true 1.583,3.365 1.25,3.365 false 4.969,3 5.438,3.271 0.469,0.271 10 false (1) ● 6.552,3.896 7.01,4.167 0.458,0.271 10 false (3) ● 0.531,3.906 0.969,4.167 0.438,0.26 10 false (2) ● 5.292,2.948 5.573,3.302 0.281,0.354 18 false 1 0.885,3.854 1.167,4.208 0.281,0.354 18 false 2 6.885,3.844 7.073,4.198 0.188,0.354 18 false 3 5.115,0.448 5.573,0.646 0.458,0.198 10 false (1) 1.781,1.604 2.01,2 0.229,0.396 10 false (2) 5.427,1.594 5.656,1.865 0.229,0.271 10 false (3) 1.51,2.385 1.969,2.583 0.458,0.198 10 false (5) 5.49,2.375 5.948,2.573 0.458,0.198 10 false (5) 0.719,3.292 1.26,3.646 0.542,0.354 10 false (4) ● 5.708,4.344 5.896,4.698 0.188,0.354 18 false 5 1.771,1.156 2,1.427 0.229,0.271 10 true (4) 1.063,3.229 1.25,3.583 0.188,0.354 18 false 4 5.375,4.396 5.948,4.635 0.573,0.24 10 false (5) ●

Procedure Part Name Code
Z101186

Z101188

Z101187

1 SYMBOL EMBLEM 75741E (Click here) - -
2 NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE 75442 (Click here) - -
3 NO. 3 LUGGAGE COMPARTMENT DOOR PLATE 75443A (Click here) - -
4 REAR NO. 1 NAME PLATE 75441 (Click here) - -
5 ROCKER PANEL MOULDING EMBLEM 75374A (Click here) - -

● Non-reusable part - -

PROCEDURE

Hide 75741E 1.REMOVE SYMBOL EMBLEM

a.
B599705C01
2.25,1.417 3.167,1.417 true 4.333,1.24 4.688,1.552 true 5.531,0.281 5.813,0.635 0.281,0.354 18 false i 5.552,1.448 5.833,1.802 0.281,0.354 18 false ii 4.281,1.906 4.479,2.156 0.198,0.25 18 true iii 2.073,1.302 2.292,1.51 0.219,0.208 10 true *a 4.688,1.448 4.896,1.677 0.208,0.229 10 true *a
*a Boss Position - -


i.

Put protective tape around the symbol emblem.


ii.

Heat the adhesive of the symbol emblem using a heat light.

Standard Value:
Part Temperature
Symbol Emblem 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the symbol emblem excessively.



iii.

Remove the symbol emblem by the below procedure.

1. Insert piano wire between the luggage compartment door outside garnish sub-assembly and symbol emblem.

HINT:

Be careful of the boss positions.


2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

3. Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the luggage compartment door outside garnish sub-assembly.

NOTICE:

Be careful not to damage the luggage compartment door outside garnish sub-assembly.




Hide 75442 2.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

a.
B599706N02
0.573,0.271 0.854,0.625 0.281,0.354 18 false i 0.573,1.438 0.854,1.792 0.281,0.354 18 false ii 3.344,0.823 3.563,1.073 0.219,0.25 18 true iii

i.

Put protective tape around the No. 2 luggage compartment door name plate.


ii.

Heat the adhesive of the No. 2 luggage compartment door name plate using a heat light.

Standard Value:
Part Temperature
No. 2 Luggage Compartment Door Name Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the No. 2 luggage compartment door name plate excessively.



iii.

Remove the No. 2 luggage compartment door name plate by the below procedure.

1. Insert piano wire between the luggage compartment door panel and No. 2 luggage compartment door name plate.

2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

3. Pull the piano wire and scrape off the double-sided tape that holds the No. 2 luggage compartment door name plate to the luggage compartment door panel.

NOTICE:

Be careful not to damage the luggage compartment door panel.




Hide 75443A 3.REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

a.
B599709N01
0.573,0.271 0.854,0.625 0.281,0.354 18 false i 0.573,1.438 0.854,1.792 0.281,0.354 18 false ii 3.646,0.75 3.865,1 0.219,0.25 18 true iii

i.

Put protective tape around the No. 3 luggage compartment door plate.


ii.

Heat the adhesive of the No. 3 luggage compartment door plate using a heat light.

Standard Value:
Part Temperature
No. 3 Luggage Compartment Door Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the No. 3 luggage compartment door plate excessively.



iii.

Remove the No. 3 luggage compartment door plate by the below procedure.

1. Insert piano wire between the luggage compartment door panel and No. 3 luggage compartment door plate.

2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

3. Pull the piano wire and scrape off the double-sided tape that holds the No. 3 luggage compartment door plate to the luggage compartment door panel.

NOTICE:

Be careful not to damage the luggage compartment door panel.




Hide 75441 4.REMOVE REAR NO. 1 NAME PLATE

a.
B599704N01
0.573,0.271 0.854,0.625 0.281,0.354 18 false i 0.573,1.438 0.854,1.792 0.281,0.354 18 false ii 3.417,0.531 3.635,0.781 0.219,0.25 18 true iii

i.

Put protective tape around the rear No. 1 name plate.


ii.

Heat the adhesive of the rear No. 1 name plate using a heat light.

Standard Value:
Part Temperature
Rear No. 1 Name Plate 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the rear No. 1 name plate excessively.



iii.

Remove the rear No. 1 name plate by the below procedure.

1. Insert piano wire between the luggage compartment door panel and rear No. 1 name plate.

2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

3. Pull the piano wire and scrape off the double-sided tape that holds the rear No. 1 name plate to the luggage compartment door panel.

NOTICE:

Be careful not to damage the luggage compartment door panel.




Hide 75374A 5.REMOVE ROCKER PANEL MOULDING EMBLEM

a.
B599708N01
0.604,0.281 0.885,0.635 0.281,0.354 18 false i 0.583,1.438 0.865,1.792 0.281,0.354 18 false ii 3.625,0.76 3.948,1.021 0.323,0.26 18 true iii

i.

Put protective tape around the rocker panel moulding emblem.


ii.

Heat the adhesive of the rocker panel moulding emblem using a heat light.

Standard Value:
Part Temperature
Rocker Panel Moulding Emblem 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the rocker panel moulding emblem excessively.



iii.

Remove the 2 rocker panel moulding emblem by the below procedure.

1. Insert piano wire between the rocker panel moulding and rocker panel moulding emblem.

2. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

3. Pull the piano wire and scrape off the double-sided tape that holds the rocker panel moulding emblem to the rocker panel moulding.

NOTICE:

Be careful not to damage the rocker panel moulding.


4. Use the same procedure for the other side.