Home › Vehicle Interior › SEAT › FRONT POWER SEAT CONTROL SYSTEM (w/o Memory)
RM37H0E _58 Vehicle Interior _095292 SEAT _0457024 FRONT POWER SEAT CONTROL SYSTEM(w/o Memory) Y

SEAT  FRONT POWER SEAT CONTROL SYSTEM(w/o Memory)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:

Use the following procedure to troubleshoot the front power seat control system.


PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS
a.

Interview the customer to confirm the problem.


Result:
Proceed to
NEXT



NEXT

3.INSPECT AUXILIARY BATTERY VOLTAGE
3.INSPECT AUXILIARY BATTERY VOLTAGE
a.

Measure the auxiliary battery voltage.

Standard voltage:

11 to 14 V (ignition switch off)


If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.


b.

Check the fuses and relays.


c.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.


Result:
Proceed to
NEXT



NEXT

4.PROBLEM SYMPTOMS TABLE
4.PROBLEM SYMPTOMS TABLE
a.

Refer to Problem Symptoms Table.

Click hereVehicle Interior>SEAT>FRONT POWER SEAT CONTROL SYSTEM (w/o Memory)>PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in Problem Symptoms Table A
Fault is listed in Problem Symptoms Table B




A

5.OVERALL ANALYSIS AND TROUBLESHOOTING

B

5.OVERALL ANALYSIS AND TROUBLESHOOTING

b.

Inspection


Result:
Proceed to
NEXT



NEXT

6.REPAIR OR REPLACE
6.REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

7.CONFIRMATION TEST
7.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END