Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM
RM37H0E _51 Engine / Hybrid System _096346 HYBRID / BATTERY CONTROL _0453477 HYBRID BATTERY SYSTEM T

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM  PROBLEM SYMPTOMS TABLE  


Hybrid Battery System
Symptom Suspected Area Link
"Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display.*1 1. Make sure the EV battery cooling system intake port is not blocked. -
2. Make sure there are no gaps between the connecting parts of the ducts. -
3. Clean the No. 1 EV battery intake filter and No. 2 EV battery intake filter.
Check for entry of foreign matter.
Click here
4. Clear the DTCs to reset the learning values even if no DTCs are stored. -
Abnormal sound is heard from the area around the EV battery intake duct. 1. Make sure the EV battery cooling system intake port is not blocked. -
2. Make sure there are no gaps between the connecting parts of the ducts. -
3. Clean the No. 1 EV battery intake filter and No. 2 EV battery intake filter.
Check for entry of foreign matter.
Click here
"Maintenance Required for Traction Battery at Your Dealer" is displayed on the multi-information display. "Maintenance Required for Traction Battery at Your Dealer" is displayed. Click here
Ignition switch does not turn to ON (READY). Entry and start system (for start function) Click here
ECU power source circuit (hybrid battery system) Click here
ECU power source circuit (hybrid control system) Click here
Check vehicle control history Click here
The ignition switch is slow to turn to ON (READY). Check vehicle control history Click here

*1: If the battery cooling blower assembly malfunctions, DTC P0A8100, P0A8111, P0A8115, P0A814B, P0A8196 or P0A8198 will be stored. If only "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, perform the inspection of the EV battery cooling system intake port, filter and duct.