Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM
RM37H0E _54 Brake _096946 PARKING BRAKE _0455727 ELECTRIC PARKING BRAKE SYSTEM C

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM  C13B800  Electric Parking Brake Actuator  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Memory DTC Output from Priority Note
C13B800 Electric Parking Brake Actuator
·

Diagnosis Condition:

Electric parking brake operating

·

Malfunction Status:

Repeated slipping is detected

·

Detection Time:

-


Rear brake DTC stored Brake/EPB B An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

NOTICE:
·

Although DTC C13B800 may be stored after forcibly releasing the parking brake, this is not a malfunction.

·

To ensure that the electric parking brake does not operate, wait for 3 minutes or more with the ignition switch off, the driver door closed, and the brake pedal not depressed, then disconnect each connector, fuse and relay.



PROCEDURE

1.CHECK DTC
a.

Using the GTS, check for DTCs other than DTC C13B800.

Chassis > Brake/EPB > Trouble Codes
50001 435

Result:
Result Proceed to
C13B800 is not output A
C13B800 and other DTCs are output B



A

2.ELECTRIC PARKING BRAKE OPERATION CHECK

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

2.ELECTRIC PARKING BRAKE OPERATION CHECK
a.

Lift the vehicle and check the status of the rear wheels using the GTS when the electric parking brake is applied and released.

HINT:

Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE ACTUATOR>ON-VEHICLE INSPECTION


Result:
Proceed to
NEXT




NEXT

REPAIR OR REPLACE ABNORMAL WHEELS