Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM
RM37H0E _56 Audio / Visual / Telematics _095293 PARK ASSIST / MONITORING _0455115 PANORAMIC VIEW MONITOR SYSTEM C

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  U0126  Lost Communication with Steering Angle Sensor Module  U0129  Lost Communication with Brake System Control Module  U0140  Lost Communication with Body Control Module  U0163  Lost Communication with Navigation Control Module  U0233  Lost Communication with Blind Spot Monitor Master Module  U0293  Lost Communication with Hybrid/EV Powertrain Control Module  U1110  Lost Communication with Clearance Warning ECU  


DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the rear television camera assembly.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.


DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U0126 Lost Communication with Steering Angle Sensor Module Lost communication with steering sensor CAN communication system Rear Camera B
U0129 Lost Communication with Brake System Control Module Lost communication with no. 2 skid control ECU assembly CAN communication system Rear Camera B
U0140 Lost Communication with Body Control Module Lost communication with main body ECU (multiplex network body ECU) CAN communication system Rear Camera B
U0163 Lost Communication with Navigation Control Module Lost communication with radio receiver assembly CAN communication system Rear Camera B
U0233 Lost Communication with Blind Spot Monitor Master Module Lost Communication with Blind spot monitor sensor RH CAN communication system Rear Camera B
U0293 Lost Communication with Hybrid/EV Powertrain Control Module Lost Communication with EV control ECU CAN communication system Rear Camera B
U1110 Lost Communication with Clearance Warning ECU Lost communication with clearance warning ECU assembly CAN communication system Rear Camera B

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Chassis > Rear Camera > Clear DTCs
50002 85

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Chassis > Rear Camera > Trouble Codes
50001 85
HINT:
·

If CAN communication system DTCs are stored, they may also be stored in other systems.

·

If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

·

If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>PROBLEM SYMPTOMS TABLE




Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

B