Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM
RM37H0E _56 Audio / Visual / Telematics _095293 PARK ASSIST / MONITORING _0455115 PANORAMIC VIEW MONITOR SYSTEM C

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module "A" Missing Message  U013187  Lost Communication with Power Steering Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U016387  Lost Communication with Navigation Control Module Missing Message  U023387  Lost Communication with Side Obstacle Detection Control Module "B" Missing Message  U029387  Lost Communication with Hybrid/EV Powertrain Control Module Missing Message  U110487  Lost Communication with Driving Support ECU Missing Message  U111087  Lost Communication with Clearance Sonar Module Missing Message  


DESCRIPTION

These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.

HINT:

If CAN communication system DTCs are stored, they may also be stored in other systems.


DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
U012687 Lost Communication with Steering Angle Sensor Module Missing Message Lost communication with steering sensor CAN communication system Circumference Monitoring Camera Control Module B
U012987 Lost Communication with Brake System Control Module "A" Missing Message Lost communication with no. 2 skid control ECU CAN communication system Circumference Monitoring Camera Control Module B
U013187 Lost Communication with Power Steering Control Module Missing Message Lost communication with power steering ECU CAN communication system Circumference Monitoring Camera Control Module B
U014087 Lost Communication with Body Control Module Missing Message Lost communication with main body ECU (multiplex network body ECU) CAN communication system Circumference Monitoring Camera Control Module B
U016387 Lost Communication with Navigation Control Module Missing Message Lost communication with radio receiver assembly CAN communication system Circumference Monitoring Camera Control Module B
U023387 Lost Communication with Side Obstacle Detection Control Module "B" Missing Message Lost communication with blind spot monitor sensor RH CAN communication system Circumference Monitoring Camera Control Module B
U029387 Lost Communication with Hybrid/EV Powertrain Control Module Missing Message Lost communication with EV control ECU CAN communication system Circumference Monitoring Camera Control Module B
U110487 Lost Communication with Driving Support ECU Missing Message Lost communication with driving support ECU assembly CAN communication system Circumference Monitoring Camera Control Module B
U111087 Lost Communication with Clearance Sonar Module Missing Message Lost communication with clearance warning ECU assembly CAN communication system Circumference Monitoring Camera Control Module B

PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
50002 353

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs.

Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
50001 353
HINT:
·

If CAN communication system DTCs are stored, they may also be stored in other systems.

·

If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.

·

If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>PROBLEM SYMPTOMS TABLE




Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

B