| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | CENTER ROOF DRIP SIDE FINISH MOULDING LH | 75556C | ( )
|
- | - |
| *A | for Panoramic Moon Roof | *B | for Normal Roof |
| ● | Non-reusable part | - | - |
Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
75556C
1.REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING LH
| *A | for Panoramic Moon Roof | *B | for Normal Roof |
Put protective tape around the center roof drip side finish moulding LH.
Using moulding remover D, detach the clip and remove the center roof drip side finish moulding LH.
Do not remove the No. 1 roof drip side finish moulding clip.
If a No. 1 roof drip side finish moulding clip is damaged or falls off, replace it with a new one.