Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
RM37H0E _58 Vehicle Interior _095300 HEATING / AIR CONDITIONING _0455055 AIR CONDITIONING SYSTEM J

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  A/C Switch Indicator does not Turn On  


DESCRIPTION

The A/C switch indicator on multi-display turns off, the following malfunctions are possible.

Symptom Factor
The A/C switch indicator on multi-display turns off
·

Air conditioning amplifier assembly malfunction

·

Airconditioning control assembly malfunction

·

A/C switch malfunction

·

Malfunction in one of the servo motors (initialization incomplete)

·

Damper and link operation (jamming)

·

Refrigerant pressure malfunction (low pressure)

·

Low ambient temperature (including thermistor assembly)



PROCEDURE

1.CHECK MALFUNCTION STATUS
a.

Check the malfunction status of A/C switch indicator on the multi-display.


Result:
Result Proceed to
A/C switch indicators are not always illuminated A
A/C switch indicators are not illuminated only immediately after ignition switch on (READY) B



A

2.READ VALUE USING GTS (AMBIENT TEMP SENSOR)

B

2.READ VALUE USING GTS (AMBIENT TEMP SENSOR)
a.

Read the Data List according to the display on the GTS.

Body Electrical > Air Conditioner > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Ambient Temp Sensor Thermistor assembly Min.: -23.30°C (-9.94°F)
Max.: 65.95°C (150.71°F)
Actual ambient temperature displayed Thermistor assembly system malfunction
·

When open circuit: -23.30°C (-9.94°F)

·

When short circuit: 65.95°C (150.71°F)


Body Electrical > Air Conditioner > Data List
Tester Display
Ambient Temp Sensor
50003 121 2
OK:

The display is as specified in the normal condition column ( 0°C (32°F) or higher).



Result:
Proceed to
OK
NG



OK

GO TO ON-VEHICLE INSPECTION (CHECK REFRIGERANT PRESSURE USING GAUGE)

NG