Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM (for TOYOTA Connect) › from 2021.08
RM37H0E _56 Audio / Visual / Telematics _095262 TELEMATICS _0484973 TELEMATICS SYSTEM(for TOYOTA Connect) C

TELEMATICS  TELEMATICS SYSTEM(for TOYOTA Connect)  B15A804  DCM System Internal Failure  B15A846  DCM Calibration / Parameter Memory Failure  


DESCRIPTION

This DTC is stored when an internal circuit malfunction is detected by the telematics transceiver self check.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
B15A804 DCM System Internal Failure Telematics transceiver internal malfunction Telematics transceiver Telematics A
B15A846 DCM Calibration / Parameter Memory Failure Telematics transceiver internal malfunction Telematics transceiver Telematics A

CAUTION / NOTICE / HINT

NOTICE:
·

Regardless of whether DTC B15A804 has been output as a present or history DTC, the telematics transceiver should be replaced.

·

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Telematics System (for TOYOTA Connect).

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS SYSTEM (for TOYOTA Connect)>PRECAUTION

·

When replacing the telematics transceiver, make sure to replace it with a new one.



PROCEDURE

1.REPLACE TELEMATICS TRANSCEIVER
a.

Replace the telematics transceiver with a new one.

HINT:

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS TRANSCEIVER>REMOVAL



Result:
Proceed to
NEXT



NEXT