Home › ENGINE › 1NZ-FXE COOLING › RADIATOR

RADIATOR > INSTALLATION

for Preparation Click here



1. INSTALL RADIATOR FAN TEMPERATURE SWITCH


A086933E01
  1. Using SST, install the radiator fan temperature switch.

    SST
    09817-33190  

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }



2. INSTALL NO. 2 RADIATOR ASSEMBLY


A086934E01
  1. Install the No. 2 radiator to the vehicle.

  1. Install the radiator support lower LH with the 3 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf } for bolt A
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf } for bolt B

  1. Install the radiator support lower RH with the 3 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf } for bolt A
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf } for bolt B

  1. Install the radiator support upper LH with the 3 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf } for bolt A
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf } for bolt B

  1. Install the radiator support upper RH with the 3 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf } for bolt A
    3.9 N*m{ 40 kgf*cm , 35 in.*lbf } for bolt B



3. INSTALL FAN ASSEMBLY WITH MOTOR
  1. Install the fan with motor (Click here).