FRONT SEAT ASSEMBLY > INSTALLATION |
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the seat in the cabin.
Connect the connectors under the seat.
Install the 2 bolts on the front side of the seat.
Install the 2 bolts on the rear side of the seat.
| 2. INSPECT AND ADJUST SEAT SLIDE ADJUSTER LOCKS |
During sliding operation of the front seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat fixation bolts to adjust the adjuster's position.
| 3. INSTALL SEAT TRACK OUTER COVER LH |
![]() |
Attach the 3 claws to install the seat track outer cover.
| 4. INSTALL SEAT TRACK INNER BRACKET COVER LH |
![]() |
Attach the 2 claws to install the seat track bracket cover.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. INSPECT FRONT SEAT ASSEMBLY (for Front Passenger Side) |
Perform the zero point calibration and sensitivity check (Click here).
| 7. PERFORM INITIALIZATION |
Perform initialization (Click here).
| 8. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).