Home › BODY › WINDSHIELD / WINDOWGLASS › DEFOGGER RELAY

DEFOGGER RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK DEFOGGER (DEF) RELAY


B079061E02
  1. Remove the instrument panel lower (Click here).

  1. Measure the voltage.

    Standard voltage:
    Terminal Connection
    Condition
    Specified Condition
    1J-2 - Body ground
    Power switch ON (IG)
    Defogger switch ON
    10 to 14 V
    1J-2 - Body ground
    Power switch ON (IG)
    Defogger switch OFF
    0 V

    If the result is not as specified, the driver side junction block may have a malfunction.