Home › HYBRID SYSTEM › P112 HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

HYBRID CONTROL SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
*: Use the Techstream.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.CONNECT THE TECHSTREAM TO DLC3*

        HINT:
        If the display indicates a communication fault in the tester, inspect the DLC3.


      NEXT


      4.CHECK AND RECORD DTC AND FREEZE FRAME DATA*

        HINT:
        If a DTC related to the CAN communication system malfunction is output, first troubleshoot and repair the CAN communication (Click here).


      NEXT


      5.CLEAR DTC*

        NEXT


        6.PROBLEM SYMPTOM CONFIRMATION
        1. When the malfunction does not occur, go to A.

        2. When the malfunction occurs, go to B.



        B.
        Go to step 8
        A


        7.SYMPTOM SIMULATION

          NEXT


          8.CHECK DTC*

            NEXT


            9.DTC CHART

              NEXT


              10.CIRCUIT INSPECTION

                NEXT


                11.IDENTIFICATION OF PROBLEM

                  NEXT


                  12.ADJUSTMENT AND / OR REPAIR

                    NEXT


                    13.CONFIRMATION TEST

                      NEXT

                      END