Home › HYBRID SYSTEM › P112 HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P2120-111    Throttle / Pedal Position Sensor / Switch "D" Circuit

DTC    P2121-106    Throttle / Pedal Position Sensor / Switch "D" Circuit Range / Performance

DTC    P2121-114    Throttle / Pedal Position Sensor / Switch "D" Circuit Range / Performance

DTC    P2125-112    Throttle / Pedal Position Sensor / Switch "E" Circuit

DTC    P2126-109    Throttle / Pedal Position Sensor / Switch "E" Circuit Range / Performance

DTC    P2138-110    Throttle / Pedal Position Sensor / Switch "D" / "E" Voltage Correlation

for Preparation Click here


DESCRIPTION

Refer to DTC P2122 (INF 104) .

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P2120
111
Accelerator pedal position main sensor value does not change while its sub sensor value changes
  1. Accelerator pedal rod
P2121
106
Internal error of accelerator pedal position main sensor
  1. Accelerator pedal rod
P2121
114
Accelerator pedal not smoothly returning to its original position
  1. Accelerator pedal rod
P2125
112
Accelerator pedal position sub sensor value does not change while its main sensor value changes
  1. Accelerator pedal rod
P2126
109
Internal error of accelerator pedal position sub sensor
  1. Accelerator pedal rod
P2138
110
Difference between main sensor value and sub sensor value is large
  1. Accelerator pedal rod

INSPECTION PROCEDURE

If any of the above information (INF) codes are present, replace the Accelerator pedal rod.
1.REPLACE ACCELERATOR PEDAL ROD
  1. Replace the Accelerator pedal rod (Click here).


NEXT

COMPLETED