THEFT DETERRENT SYSTEM > SYSTEM DESCRIPTION |
| THEFT DETERRENT SYSTEM DESCRIPTION |
The theft deterrent system is designed to deter break-in and theft. If an attempted break-in or theft is detected, a vehicle horns and security horn will sound; room light will light up; and hazard warning lights, taillights and headlights will flash continuously. The system uses the following cues to detect an attempted break-in or theft: 1) vehicle is forcibly entered, 2) engine hood is forcibly opened, 3) doors are unlocked without the use of a key, or 4) the battery cables are disconnected and then reconnected.
The system has 2 modes: active arming mode and passive arming mode (Click here). Passive arming mode can be toggled ON and OFF (Click here).
Each mode has 4 states; disarmed state, arming preparation state, armed state and alarm sounding state.
Disarmed state:
Arming preparation state:
The theft deterrent system is not operating.
Armed state:
The theft deterrent system is operating (60 +-5 seconds).
Alarm sounding state:
The alarm function is operating.