Home › BRAKE › BRAKE CONTROL › ELECTRONICALLY CONTROLLED BRAKE SYSTEM

DTC    C1203/95    ECM Communication Circuit Malfunction

for Preparation Click here


DESCRIPTION


DTC No.
INF Code
DTC Detection Condition
Trouble Area
C1203/95
-
When one of following conditions is met:
  1. No stored information for destination.
  2. No stored information whether VSC is in operation or not.
  3. Destination information from HV-ECU does not match with stored value.
Skid control ECU

INSPECTION PROCEDURE

NOTICE:
When replacing the skid control ECU, perform initialization of linear solenoid valve and calibration (Click here).

1.CHECK DTC (HYBRID CONTROL SYSTEM)
  1. Check if a hybrid control system DTC is output (Click here).
    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
REPAIR HYBRID CONTROL SYSTEM
A


2.CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
  1. Check if C1300/- is output.
    Result 
    Result
    Proceed to
    C1300/- is not output
    A
    C1300/- is output
    B



B
GO TO DTC C1300
A

REPLACE SKID CONTROL ECU