Home › BODY ELECTRICAL › OTHER SYSTEM › TELLTALE LIGHT

TELLTALE LIGHT > REMOVAL



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
  1. Remove the instrument panel (Click here).



3. REMOVE TELLTALE LIGHT ASSEMBLY


B074056E04
  1. Disconnect the connector.

  1. Detach the 2 claws and remove the telltale light.