Home › BODY › ENGINE HOOD / DOOR › HOOD

HOOD > REMOVAL

for Preparation Click here



1. REMOVE RADIATOR SUPPORT OPENING COVER


    B075132E02
  1. Remove the 6 clips and radiator support opening cover.



2. REMOVE HOOD LOCK ASSEMBLY


    B076899E01
  1. Remove the 3 bolts and hood lock.

  1. Disconnect the lock control cable.



3. REMOVE HOOD SUPPORT ROD
  1. Remove the rod.

  1. Using a clip remover, remove the holder and retainer.



4. REMOVE HOOD INSULATOR
  1. Using a clip remover, remove the 6 clips and insulator.



5. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY
  1. Remove the front bumper cover (Click here).

  1. Remove the front fender liner (Click here).



  1. Using a screwdriver, disconnect the cable clamps as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.



    B075134E02

  1. Remove the cable.