Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO ANTENNA HOLDER

RADIO ANTENNA HOLDER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.



2. REMOVE ROOF HEADLINING ASSEMBLY
  1. Remove the roof headlining (Click here).



3. REMOVE ANTENNA (CORD / POLE SEPARATE TYPE) HOLDER ASSEMBLY


    I038960E01
  1. Disconnect the connector.

  1. Remove the antenna nut.



  1. Remove the clamp and detach the 2 claws to remove the antenna holder.


    I038872E02