Home › HYBRID SYSTEM › HYBRID TRANSMISSION / TRANSAXLE › OIL PUMP DRIVE SHAFT

OIL PUMP DRIVE SHAFT > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL LH


2. REMOVE ENGINE UNDER COVER LH


3. DRAIN TRANSAXLE OIL
  1. Drain transaxle oil (Click here).



4. REMOVE TRANSMISSION OIL PUMP COVER SUB-ASSEMBLY


    C069315E01
  1. Remove the 5 bolts and oil pump cover.



    G031019E02
  1. Remove the O-ring.



5. REMOVE TRANSAXLE OIL PUMP DRIVE ROTOR


    C099329E03
  1. Remove the transaxle oil pump drive rotor from the hybrid vehicle transaxle.



6. REMOVE OIL PUMP DRIVEN ROTOR


    C099329E02
  1. Remove the oil pump driven rotor from the hybrid vehicle transaxle.



7. REMOVE OIL PUMP DRIVE SHAFT


    C069318E01
  1. Remove the oil pump drive shaft from the hybrid vehicle transaxle.