Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

DTC    62-78    DSP Error

DTC    63-78    DSP Error

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
62-78
Error occurs during the decode process (MP3/WMA)
Radio receiver
63-78
Error occurs during the decode process (MP3/WMA)

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

NOTICE:
  1. This code may be output even if there is no malfunction.
  2. If this code is output frequently, replace the radio receiver.

1.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble code occurs again.

    OK:
    Malfunction disappears.



NG
REPLACE RADIO RECEIVER
OK

END