Home › BODY ELECTRICAL › AUDIO / VISUAL › NETWORK GATEWAY ECU

NETWORK GATEWAY ECU > INSTALLATION

for Preparation Click here



1. INSTALL NETWORK GATEWAY ECU


I038881
  1. Install the network gateway ECU with the bolt.

  1. Connect the connector.



2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
  1. Install the instrument panel (Click here).



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.