Home › BODY ELECTRICAL › LIGHTING › BACK DOOR COURTESY SWITCH

BACK DOOR COURTESY SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR LOCK ASSEMBLY


B075174E01
  1. Install the door lock with the 3 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 75 in.*lbf }

  1. Adjust the door lock (Click here).



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


3. PERFORM INITIALIZATION
  1. Perform initialization (Click here).

    NOTICE:
    Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.