Home › Vehicle Exterior › BODY PANEL › REAR FLOOR SIDE MEMBER
BM2170E _01 Vehicle Exterior _057059 BODY WELD POINT _0278258 REAR FLOOR SIDE MEMBER F

BODY WELD POINT  REAR FLOOR SIDE MEMBER  CUT AND JOIN REPLACEMENT SECTIONS  


K104282

With the body lower back panel removed.


REMOVAL


Symbol meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location


REMOVAL POINT
1.

After removing the floor side rail panel sub-assembly Fr, remove the rear floor side member sub-assembly.


K135456E01
1.417,3.948 1.042,3.948 1.042,3.948 2.042,2.26 false 3.438,8.281 4.083,7.677 4.083,7.677 4.344,7.677 false 4.552,1.479 5.25,1.667 0.698,0.188 10 false 115 (4.53) 1.458,3.844 3.24,4.031 1.781,0.188 10 false FLOOR SIDE RAIL PANEL 1.448,4.01 2.958,4.208 1.51,0.198 10 false SUB-ASSEMBLY FR 4.385,7.573 5.74,7.76 1.354,0.188 10 false REAR FLOOR SIDE 4.375,7.74 6.177,7.917 1.802,0.177 10 false MEMBER SUB-ASSEMBLY 0.635,8.458 1.24,8.677 0.604,0.219 10 false 65 (2.56) 0.313,9.365 1.542,9.563 1.229,0.198 10 false mm (in.)

INSTALLATION


Symbol meaning
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld


INSTALLATION POINT
1.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

2.

After welding the rear floor side member sub-assembly to the vehicle side, install the floor side rail panel sub-assembly Fr.

3.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

4.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K135457E01
3.323,2.438 3.885,1.781 3.885,1.781 4.094,1.781 false 1.563,9.563 1.323,9.563 1.323,9.563 2,8.24 false 4.135,1.677 5.469,1.865 1.333,0.188 10 false REAR FLOOR SIDE 4.125,1.844 5.938,2.042 1.813,0.198 10 false MEMBER SUB-ASSEMBLY 1.604,9.458 4.729,9.656 3.125,0.198 10 false FLOOR SIDE RAIL PANEL SUB-ASSEMBLY FR