Home › General › INTRODUCTION › HOW TO USE THIS MANUAL
BM2170E _V1 General _057058 INTRODUCTION _0301103 HOW TO USE THIS MANUAL F

INTRODUCTION  HOW TO USE THIS MANUAL  GENERAL INFORMATION  


Scope of the repair work explanation


a.

This text explains the welding panel replacement instructions from the vehicle's white body condition. We have abbreviated the explanations of the removal and reinstallation of the equipment parts up to the white body condition and of the installation, inspection, adjustment and final inspection of equipment parts after replacing the weld panel.


b.

When repairing, do not cut and join areas that are not shown in this manual. Only work on the specified contents to maintain body strength.


c.

Make sure to perform the following essential procedures, although they are omitted in this manual.

i.

Clean and wash removed parts, if necessary.


ii.

Visual inspection.



d.

This manual has references to the Repair Manual.

i.

vehicle interior section


ii.

vehicle exterior section




Section categories


a.

This manual has been divided as shown below.

Section Title Contents Examples
INTRODUCTION Explanation of general body repair. Views of welded panel replacement instructions. SYMBOLS
PRECAUTIONS FOR WELDING
BODY WELD POINT Instructions for replacing the weld panels from the white body condition, from which bolted parts have been removed, with individual supply parts. CUT AND JOIN REPLACEMENT SECTION
ASSEMBLY REPLACEMENT
BODY DIMENSIONS Body aligning measurements. THREE-DIMENSIONAL DISTANCE
TWO-DIMENSIONAL DISTANCE
PAINTING / COATING Scope and type of anti-rust treatment, etc. together with weld panel replacement. APPLICATION AREAS
INSTALLATION AREAS



REPAIR PROCEDURES


a.

Illustrations of similar vehicle models are sometimes used. In these cases, minor details may be different from the actual vehicle.


b.

About a symmetrical part, only one side is described.



TERM DEFINITIONS


CAUTION Possibility of injury to you or other people.
NOTICE Possibility of damage to components being repaired.
HINT Provides additional information to help you perform repairs.


INTERNATIONAL SYSTEM OF UNITS


a.

The units used in this manual comply with the International System of Units (SI) standard. Units from the metric system and the English systems are also provided.

Below is an example.


Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)