Home › General › INTRODUCTION › FEATURES › 2011.12–2015.11
NM2170E _V1 General _056956 INTRODUCTION _0277751 FEATURES UN GENERAL/CONTROL/DETAILS F

INTRODUCTION  FEATURES  GENERAL/CONTROL/DETAILS  PERFORMANCE  


OUTLINE


a.

TOYOTA Hybrid System-II (THS-II)

i.

This system optimally performs cooperative control of the 1NZ-FXE engine, and Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2) in the P510 hybrid vehicle transaxle assembly that provides excellent transmission performance. Furthermore, this system uses a high-output HV battery with a nominal voltage of DC 144 V, and a variable-voltage system in which a boost converter boosts the operating voltage of the system to a maximum voltage of DC 520 V.

V100884E03
4.448,2.365 5.406,0.333 5.406,0.333 5.583,0.333 true 1.823,3.365 2.229,4.5 2.229,4.5 2.375,4.5 true 1.875,2.74 3.021,0.354 3.021,0.354 3.188,0.354 true 1.542,2.385 0.802,0.344 0.802,0.344 0.635,0.344 true 5.604,0.24 5.823,0.427 0.219,0.188 10 false *3 3.219,0.26 3.448,0.438 0.229,0.177 10 false *2 0.458,0.26 0.667,0.417 0.208,0.156 10 false *1 2.396,4.417 2.615,4.604 0.219,0.188 10 false *4

Text in Illustration
*1 1NZ-FXE Engine *2 Inverter with Converter Assembly
*3 HV Battery Assembly *4 P510 Hybrid Vehicle Transaxle Assembly

System Performance
Maximum System Output* kW 73.6

*: Maximum system output is engine output and MG2 output controlled by THS-II. MG2 output depends on power supplied by the HV battery.



b.

1NZ-FXE Engine

i.

The 1NZ-FXE is an in-line 4-cylinder, 1.5-liters, 16-valve DOHC engine.


ii.

This engine uses a high-expansion ratio Atkinson cycle, Variable Valve Timing-intelligent (VVT-i) system, Electric Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. In addition, use of an electric engine water pump assembly has eliminated the V-ribbed belt. Thus, improved engine performance, quietness, fuel economy, and cleaner emissions have been achieved.

V103003

Item Specification
No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve, DOHC with VVT-i
Fuel System SFI
Displacement cm3 (cu. in.) 1497 (91.3)
Max. Output (SAE-NET)* kW @ rpm 54 @ 4800
Max. Torque (SAE-NET)* N*m @ rpm 111 @ 3600 - 4400

*: Maximum output and torque rating are determined using the revised SAE J1349 procedure.




c.

P510 Hybrid Vehicle Transaxle Assembly

i.

The P510 hybrid vehicle transaxle assembly contains Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2).

V102230E02
4.271,1.406 4.885,0.385 4.885,0.385 5.052,0.385 true 2.438,1.396 1.865,0.375 1.865,0.375 1.667,0.375 true 5.073,0.292 5.313,0.51 0.24,0.219 10 false *2 1.5,0.281 1.708,0.469 0.208,0.188 10 false *1

Text in Illustration
*1 Motor Generator No. 2 (MG2) *2 Motor Generator No. 1 (MG1)

Item Specification
Motor Generator No. 1 (MG1) Motor Generator No. 2 (MG2)
Type Permanent Magnet Motor Permanent Magnet Motor
Function Generate, Engine Starter Generate, Drive Wheels
Cooling System Air-cooled Air-cooled
Maximum Output kW - 45
Maximum Torque N*m - 169



d.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A torsion-beam type suspension is used for the rear.

V100883



e.

Steering

i.

An Electric Power Steering (EPS) system is used.

V102171



f.

Brake

Item Specification
Front Brake Type Ventilated Disc
Rotor Size (D x T)* mm (in.) 255 x 22 (10.04 x 0.87)
Rear Brake Type Leading-trailing Drum
Drum Inner Diameter mm (in.) 228.6 (9.00)
Brake Control System ABS with EBD, Brake Assist, TRC, VSC, Hill-start Assist Control

*: Diameter x Thickness