Home › Drivetrain › AXLE AND DIFFERENTIAL › AXLE SYSTEM
NM2170E _52 Drivetrain _056969 AXLE AND DIFFERENTIAL _0277765 AXLE SYSTEM UN GENERAL/CONTROL/DETAILS F

AXLE AND DIFFERENTIAL  AXLE SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

Front Axle

i.

The front axle uses a double-row angular ball bearing which offers low rolling resistance.


ii.

A 12-point lock nut is used for the front axle shaft nut. Secure and solid fastening is achieved by staking the nut. Once removed, this nut cannot be reused.


iii.

Due to an active type speed sensor being adopted, a sensor rotor is provided on the hub bearing inner race.

X105062E05
4.385,2.542 5.135,1.938 5.135,1.938 5.448,1.938 true 3.927,3.094 3.365,3.448 3.365,3.448 1.302,3.448 true 4.563,2.896 5.063,3.292 5.063,3.292 5.448,3.292 true 4.208,3.042 4.646,3.865 true 4.052,3.031 4.49,3.854 4.49,3.854 5.448,3.854 true 5.469,1.854 5.74,2.063 0.271,0.208 10 false *1 5.469,3.198 5.719,3.396 0.25,0.198 10 false *4 5.469,3.76 5.74,3.948 0.271,0.188 10 false *2 1.146,3.365 1.375,3.573 0.229,0.208 10 false *3

Text in Illustration
*1 Front Axle Hub Sub-assembly *2 Double-row Angular Ball Bearing
*3 Sensor Rotor *4 Front Axle Shaft Nut



b.

Rear Axle

i.

The rear axle uses a double-row angular ball bearing which offers low rolling resistance.


ii.

Due to the use of an active type speed sensor, a sensor rotor is provided on the outer circumference of the hub bearing inner race.

X105063E04
3.417,2.677 2.927,3.646 2.927,3.646 2.354,3.646 true 4.167,2.708 4.615,3.063 4.615,3.063 4.729,3.063 true 3.656,2.156 3.208,0.531 true 3.073,0.531 3.51,0.531 3.51,0.531 3.969,2.167 true 2.177,3.563 2.438,3.76 0.26,0.198 10 false *3 2.917,0.438 3.135,0.646 0.219,0.208 10 false *2 4.76,2.958 5.021,3.156 0.26,0.198 10 false *1

Text in Illustration
*1 Rear Axle Hub and Bearing Assembly *2 Double-row Angular Ball Bearing
*3 Sensor Rotor - -