Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › 2014.12–2017.06
NM2170E _53 Suspension _056970 FRONT SUSPENSION _0277766 FRONT SUSPENSION SYSTEM UN GENERAL/CONTROL/DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Front Suspension Support Sub-Assembly and Front Coil Spring

i.

The front suspension support sub-assembly has been adopted the construction that the support is connected in one point. As a result, a compact and lightweight construction is offered.


ii.

A pigtail type of front coil spring is used where the top and bottom diameters are different, creating a compact and lightweight construction. Lateral force reduction springs are used to control the reaction force line of the front coil spring, and reduce the bending force applied to the front shock absorber assembly. This reduces suspension friction, delivering a very comfortable ride.


iii.

Ball bearings have been adopted for the strut mounting bearings to improve steering response, as well as to reduce the feel of friction.

X123302E04
3.719,1.542 4.281,0.99 4.281,0.99 4.375,0.99 true 3.313,1.448 2.75,0.896 2.75,0.896 2.646,0.896 true 4.177,2.083 4.74,1.531 4.74,1.531 4.833,1.531 true 3.781,2.302 4.74,2.771 4.74,2.771 4.833,2.771 true 3.438,3.031 2.479,3.5 2.479,3.5 2.375,3.5 true 4.865,1.448 5.135,1.698 0.271,0.25 10 false *3 2.479,0.813 2.75,1.063 0.271,0.25 10 false *1 4.406,0.896 4.677,1.146 0.271,0.25 10 false *2 4.865,2.677 5.135,2.927 0.271,0.25 10 false *4 2.208,3.417 2.479,3.667 0.271,0.25 10 false *5

Text in Illustration
*1 Front Suspension Support Sub-assembly *2 Strut Mounting Bearing
*3 Front Coil Spring *4 Front Spring Bumper
*5 Front Shock Absorber Assembly - -



b.

Front Shock Absorber Assembly

i.

A low-pressure N2 gas sealed front shock absorber is used to realize both driving stability and ride comfort.

X123774E02
2.271,2.083 2.865,1.469 2.865,1.469 2.969,1.469 true 1.927,2.969 1.208,2.375 1.208,2.375 1.104,2.375 true 2.396,3.573 2.875,3.052 2.875,3.052 2.979,3.052 true 5.313,2.083 5.906,1.469 5.906,1.469 6.01,1.469 true 5.427,3.531 5.906,3.01 5.906,3.01 6.01,3.01 true 4.969,2.979 4.24,2.396 4.24,2.396 4.146,2.396 true 1.427,0.396 1.823,0.667 0.396,0.271 10 false *A 4.5,0.396 4.896,0.667 0.396,0.271 10 false *B 0.938,2.292 1.188,2.51 0.25,0.219 10 false *1 3.969,2.313 4.219,2.531 0.25,0.219 10 false *1 2.99,1.375 3.24,1.594 0.25,0.219 10 false *2 6.031,1.385 6.281,1.604 0.25,0.219 10 false *2 3.01,2.958 3.26,3.177 0.25,0.219 10 false *3 6.042,2.927 6.292,3.146 0.25,0.219 10 false *4

Text in Illustration
*A Destination Package Models Except for New Zealand *B Destination Package Models for New Zealand
*1 Front Shock Absorber Assembly *2 Low-pressure N2 Gas
*3 Multi-leaf Type Linear Control Valve *4 Blow-off Type Linear Control Valve

NOTICE:

To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.



ii.

The multi-leaf type linear control valve has a structure consisting of several layered leaf valves with different diameter. Through use of the multi-leaf type linear control valve, changes in the damping force are made constant at low piston speeds, thus offering the excellent riding comfort and controllability.

X105961E05
3.688,1.635 3.344,1.156 3.344,1.156 3.198,1.156 false 4.906,1.635 5.229,1.115 5.229,1.115 5.375,1.115 false 1.542,3.979 3.896,4.229 2.354,0.25 10 false Multi-leaf Type Linear Control Valve 1.531,4.313 2.906,4.604 1.375,0.292 10 false Conventional Valve 5.719,2.823 6.74,3.063 1.021,0.24 10 false Piston Speed 0.292,0.198 3.042,0.479 2.75,0.281 12 false Damping Force Characteristics: 2.417,1.052 3.167,1.271 0.75,0.219 10 false Low Speed 5.417,1.01 7.031,1.281 1.615,0.271 10 false Medium and High Speed 0.625,2.115 2.583,2.333 1.958,0.219 10 false Extension Side Damping Force 0.438,3.302 2.583,3.5 2.146,0.198 10 false Compression Side Damping Force


iii.

The blow-off type liner control valve reduce damping force at medium and high piston speeds and to increase it at low piston speed. As a result, thus offering the excellent riding comfort and controllability.

X123773E03
3.458,1.313 3.125,0.833 3.125,0.833 2.969,0.833 true 4.948,1.313 5.271,0.792 5.271,0.792 5.417,0.792 true 1.583,4.427 3.938,4.677 2.354,0.25 10 false : Conventional Valve 1.573,4.094 3.865,4.385 2.292,0.292 10 false : Blow-off Type Linear Control Valve 5.76,2.917 6.781,3.156 1.021,0.24 10 false Piston Speed 0.198,0.167 2.667,0.396 2.469,0.229 12 false Damping Force Characteristics: 2.198,0.75 2.927,0.948 0.729,0.198 10 false Low Speed 5.458,0.688 7.073,0.958 1.615,0.271 10 false Medium and High Speed 0.688,2.208 2.677,2.448 1.99,0.24 10 false Extension Side Damping Force 0.427,3.24 2.604,3.479 2.177,0.24 10 false Compression Side Damping Force