Home › Suspension › REAR SUSPENSION › REAR SUSPENSION SYSTEM › 2011.12–2017.06
NM2170E _53 Suspension _056971 REAR SUSPENSION _0277767 REAR SUSPENSION SYSTEM UN GENERAL/CONTROL/DETAILS F

REAR SUSPENSION  REAR SUSPENSION SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


CONSTRUCTION


a.

Rear Coil Spring and Rear Shock Absorber Assembly

i.

Both ends of the coil spring have been formed into a small-diameter, pigtail shape. The compact construction has been designed to accommodate the low floor package.


ii.

Spring insulators are provided at the top and bottom ends of the rear coil springs, and the thickness of the insulators has been optimized to reduce vibration and achieve excellent ride comfort.


iii.

The low-pressure N2 gas sealed rear shock absorber assembly delivers stable damping force characteristics, providing excellent maneuverability and ride comfort.

X105967E05
4.792,1.396 4.313,0.917 4.313,0.917 4.156,0.917 true 1.781,1.01 1.469,0.708 1.469,0.708 1.323,0.708 true 2.333,0.865 2.646,0.552 2.646,0.552 2.792,0.552 true 1.729,2.021 1.417,2.323 1.417,2.323 1.271,2.323 true 2.406,2.188 2.094,2.5 2.094,2.5 1.948,2.5 true 4.906,1.635 5.51,1.031 5.51,1.031 5.667,1.031 true 4.979,2.042 5.469,1.563 5.469,1.563 5.615,1.563 true 4.854,3.26 5.646,4.052 5.646,4.052 5.792,4.052 true 4.917,1.51 5.396,1.031 5.396,1.031 5.521,1.031 true 5.656,1.479 5.906,1.667 0.25,0.188 10 false *8 4,0.833 4.25,1.021 0.25,0.188 10 false *6 1.156,0.615 1.406,0.802 0.25,0.188 10 false *1 1.104,2.24 1.354,2.427 0.25,0.188 10 false *4 1.792,2.417 2.042,2.604 0.25,0.188 10 false *3 2.813,0.458 3.063,0.646 0.25,0.188 10 false *2 5.823,3.958 6.073,4.146 0.25,0.188 10 false *5 5.719,0.917 5.969,1.104 0.25,0.188 10 false *7

Text in Illustration
*1 Rear Coil Spring *2 Rear Upper Coil Spring Insulator
*3 Rear Lower Coil Spring Insulator *4 Coil Spring Seat
*5 Rear Shock Absorber Assembly *6 Rear Suspension Support
*7 Rear No. 1 Spring Bumper *8 Dust Cover

NOTICE:

To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.




b.

Axle Beam and Trailing Arm

i.

The axle beam (rear axle beam assembly) offers not only high rigidity but also stability by optimized shearing center position.


ii.

The trailing arm (rear axle beam assembly) is fixed on the body via an angled bushing.


iii.

The inner cylinder of the rear axle carrier bush is made of aluminum, reducing the weight.

X108138E03
4.219,3.094 4.052,3.615 4.052,3.615 3.74,3.615 true 2.49,2.917 2.333,3.438 2.333,3.438 2.01,3.438 true 1.219,1.396 1.313,1.094 1.313,1.094 1.625,1.094 true 5.302,3.521 5.563,3.833 5.563,3.833 5.813,3.833 true 1.844,3.344 2.208,3.615 0.365,0.271 10 false *3 3.573,3.542 3.938,3.813 0.365,0.271 10 false *1 5.833,3.729 6.198,4 0.365,0.271 10 false *2 1.656,1.01 1.927,1.281 0.271,0.271 10 false *4 0.51,0.927 0.781,1.198 0.271,0.271 10 false *a

Text in Illustration
*1 Axle Beam (Rear Axle Beam Assembly) *2 Trailing Arm (Rear Axle Beam Assembly)
*3 Rear Axle Carrier Bush *4 Inner Cylinder
*a Cross Section - -
V100135

Front - -