FUNCTION OF MAIN COMPONENTS
The main components in the power door lock control system have the following functions:
| Component | Function | |
|---|---|---|
| Door Courtesy Light Switch Assembly | Detects whether the doors are open or closed and sends this information to the main body ECU (multiplex network body ECU). | |
| Door Lock Assembly | Door Lock Position Switch | Detects whether the doors are locked or unlocked and sends this information to the main body ECU (multiplex network body ECU). |
| Door Lock Motor | Drives the motor in response to signals from the main body ECU (multiplex network body ECU) and locks or unlocks the doors. | |
| Key-linked Switch | Sends a lock or unlock request signal to the main body ECU (multiplex network body ECU) by the ignition key. | |
| Back Door Lock Assembly | Back Door Courtesy Light Switch | Detects whether the back door is open or closed and sends this information to the main body ECU (multiplex network body ECU). |
| Door Lock Motor | Drives the motor in response to signals from the main body ECU (multiplex network body ECU) and releases the back door latch. | |
| Back Door Opener Switch Assembly | Sends back door opener switch signals to the certification ECU (smart key ECU assembly). | |
| Power Window Regulator Master Switch Assembly | Door Lock Switch | Sends manual lock and unlock request signals to the main body ECU (multiplex network body ECU). |
| Certification ECU (Smart Key ECU Assembly) | Sends the back door opener switch signals to the main body ECU (multiplex network body ECU). | |
| Combination Meter Assembly | Receives signals from the speed sensor and sends the vehicle speed signal to the main body ECU (multiplex network body ECU). | |
| Main Body ECU (Multiplex Network Body ECU) | Drives all door lock motors in response to signals. | |
FUNCTION
The power door lock control system has the following functions:
| Function | Outline |
|---|---|
| Manual Lock and Unlock | This function can lock or unlock all doors by operation of the door lock switch. |
| Manual Unlock Prohibition | Performing the door lock operation with a door control transmitter will prohibit the doors from being unlocked by the door lock control switch. |
| Key-linked Lock and Unlock | This function, linked with the driver door key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected. |
| Key Confinement Prevention | When the electrical key transmitter sub-assembly is present in the interior detection area and a door lock operation is performed while the driver door is open, all the doors will be unlocked. |
| Back Door Open | Pressing the back door opener switch when the back door is unlocked will open the back door. |