Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM › from 2014.12
NM2170E _58 Vehicle Interior _056985 THEFT DETERRENT / KEYLESS ENTRY _0277783 ENGINE IMMOBILISER SYSTEM UN GENERAL/CONTROL/DETAILS F

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

The engine immobiliser system compares the ID code that is registered in the ID code box (immobiliser code ECU) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly. The system unsets if these ID codes match. Thus, the ID code box (immobiliser code ECU) and the hybrid vehicle control ECU communicate with each other enabling the hybrid control system to start.

HINT:

When replacing the ID code box (immobiliser code ECU) or making a new electrical key transmitter sub-assembly, key recognition code(s) must be registered. For details, refer to the corresponding Service Bulletin for this model.