Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM › 2011.12–2017.06
NM2170E _58 Vehicle Interior _056990 HEATING / AIR CONDITIONING _0277789 AIR CONDITIONING SYSTEM UN GENERAL/CONTROL/DETAILS F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  GENERAL/CONTROL/DETAILS  GENERAL  


OUTLINE


a.

An automatic air conditioning system is used.


b.

The air conditioning system main components have been made compact, lightweight, and highly efficient to achieve both comfort and good fuel economy at the same time.


c.

The Beneficial Refrigerant Stream (BRS) type No. 1 cooler evaporator sub-assembly, which is beneficial to the reduction of pressure loss, has been provided.



SPECIFICATION


a.

Performance

Item Specification
Heater Heater Output W 4600
Air Flow Volume m3/h 280
Power Consumption W 190
Cooler Cooling Capacity W 4800
Air Flow Volume m3/h 475
Power Consumption W 220


b.

Ventilation and Heater Radiator Unit Sub-assembly

Item Specification
Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum (SFA)-II
Size: W x H x L mm (in.) 201.5 x 120 x 27 (7.9 x 4.7 x 1.1)
Fin Pitch mm (in.) 1.8 (0.07)
Blower with Fan Motor Sub-assembly Motor Type K62-12.5T
Fan Type Sirocco
Fan Size: Dia. x H mm (in.) 145 x 65 (5.7 x 2.6)


c.

Air Conditioning

Item Specification
Cooler Condenser Assembly Type Multi-Flow (MF)-IV (Sub Cool)
Size: W x H x L mm (in.) 620 x 357.4 x 16 (24.4 x 14.1 x 0.6)
Fin Pitch mm (in.) 3.15 (0.1)
No. 1 Cooler Evaporator Sub-assembly Type Beneficial Refrigerant Stream (BRS)
Size: W x H x L mm (in.) 199.3 x 231 x 38 (7.8 x 9.1 x 1.5)
Fin Pitch mm (in.) 3.0 (0.1)
Electric Inverter Compressor (Compressor with Motor Assembly) Type ES14
Compressor Oil Type ND11
Refrigerant Type HFC134a
Charge Volume g 420+/-30
Air Refiner Element Pollen Removal Type



MAIN FEATURES


a.

The air conditioning system has the following features:

Item Outline
High Performance
·

Neural network control is used so passengers can control the air conditioning accurately for maximum comfort.

·

A pollen removal type air refiner element is used as clean air filter.

·

The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control.


Lightweight A bus connector (air conditioning harness assembly) with a built-in IC is used in a lightweight wire harness design with a reduced number of wires. The use of this connector means that pulse pattern type servo motors are used.
Compact
·

A semi-center location air conditioning unit in which the No. 1 cooler evaporator sub-assembly and heater radiator unit sub-assembly are placed in the vehicle's longitudinal direction is used.

·

A blower motor with a built-in blower motor controller is used in a compact construction.


Others

The following parts are used to ensure high cooling or heating performance while realizing a compact and lightweight construction.

-

Beneficial Refrigerant Stream (BRS) type No. 1 cooler evaporator sub-assembly

-

Straight Flow Aluminum (SFA)-II type heater radiator unit sub-assembly

-

Multi-Flow (MF)-IV type cooler condenser assembly

-

ES14 type electric inverter compressor (compressor with motor assembly)