Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2017.06
NM2170E _56 Audio / Visual / Telematics _056981 AUDIO / VIDEO _0277777 AUDIO AND VISUAL SYSTEM UN GENERAL/CONTROL/DETAILS F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  GENERAL/CONTROL/DETAILS  DETAILS  


FUNCTION OF MAIN COMPONENTS


Component Function

*: Models with radio receiver assembly

Radio and Receiver Assembly*
·

Plays back audio from each audio source, such as radio, CD and Bluetooth audio.

·

Sends audio signals from each audio source to the speakers.


Roof Antenna Pole Sub-assembly Receives radio broadcasting signals (AM/FM).
No. 1 Amplifier Antenna Assembly Amplifies radio broadcasting signals from the radio antenna and sends them to the radio receiver assembly.
Steering Pad Switch Assembly Sends operation signals from switches such as the volume switch, mode switch and seek switch to the radio receiver assembly.
Telephone Microphone Assembly Recognizes speech during a hands-free call operation and sends the audio signal to the radio receiver assembly.
Combination Meter Assembly Sends vehicle speed signals to the radio receiver assembly.


FUNCTION


a.

Bluetooth Audio System

i.

The functions of the Bluetooth audio system that can be used vary with the version of the Audio/Video Remote Control Profile (AVRCP) supported by the Bluetooth audio player that is being used.


ii.

The available Bluetooth audio system functions differ in accordance with each Audio/Video Remote Control Profile (AVRCP) as follows:

Function Outline Audio/Video Remote Control Profile (AVRCP)
Version 1.0 Version 1.3
Play Starts playing the music. ○ ○
Stop Stops playing the music. ○ ○
Pause Pauses the music. ○ ○
Track Up/Down Changes the track. ○ ○
Fast Up/Down Fast-forwards or reverses. ○ ○
Album Up/Down Changes the album. - ○
Repeat (Single Repeat) Repeats the selected music. - ○
Random (All Track Random) Plays all the music in the portable audio device at random. - ○
Scan (All Track Scan) Scans all the music in the portable audio device. - ○
Music Information Shows track number, playtime, track name, artist name and album name. - ○
Remaining Battery Level Shows the remaining battery level of the Bluetooth audio player. - ○

○: Usable

-: Unusable



iii.

The functions of the Bluetooth audio system are shown in the following table:

Function Outline
Set Bluetooth Audio Player Registering a Bluetooth Audio Player In order to use the Bluetooth audio system with a Bluetooth audio player, it is necessary to register it in the audio head unit. Once a Bluetooth audio player is registered, the Bluetooth audio system becomes available automatically. The user can register up to 2 Bluetooth audio players.*
Deleting a Bluetooth Audio Player The user can delete a Bluetooth audio player.
Connecting a Bluetooth Audio Player Enables the user to select whether to connect to the Bluetooth audio player automatically or manually. If the Bluetooth audio player has been registered and automatic connection is enabled, the Bluetooth audio player will be connected automatically.
Change Settings of Bluetooth Audio Selecting a Bluetooth Audio Player If the user has registered a second Bluetooth audio player, either one can be selected for connection.
Displaying Bluetooth Audio Player The user can view the information of the Bluetooth audio player on the system.
Changing the Connection Method Enables the user to select the connection method. With this function, the user determines whether to make a connection from the audio head unit to the Bluetooth audio player or from the Bluetooth audio player to the audio head unit.
Displaying the Bluetooth Audio Setting The user can see the Bluetooth audio information settings on the system.
Changing the Device Name or Passcode The user can change a device name or a passcode.
Initializing the Bluetooth Audio Settings The user can initialize the settings.

*: The maximum number of Bluetooth devices that can be registered (including Bluetooth phones and Bluetooth audio players)




b.

Bluetooth Hands-free System

i.

Bluetooth is a short-distance, high-speed wireless data communication system that uses the 2.4 GHz frequency band prescribed by the Bluetooth Special Interest Group (SIG).


ii.

This system enables drivers to place or receive phone calls without operating a cellular phone.


iii.

The Bluetooth hands-free system is included in the audio head unit.


iv.

The major hands-free functions are shown in the following table:

Function Audio Head Unit
Radio Receiver Assembly
Calling with Bluetooth Phone By Dial ○
By Phonebook ○ (1000 Items)*1
By Call History*2 Dialed Number ○ (10 Items)
Received Call ○ (10 Items)
Missed Call ○ (10 Items)
All Call History ○ (30 Items)
By Speed Dial*2 ○
Receive with Bluetooth Phone/Talk on Bluetooth Phone Receiving Call*2 Received Manually ○
Received Refusal ○
Interrupt Call*2 ○
Tone Sending By Dial ○
By Registered Number*2 ○
Recognition/Connection Registering Bluetooth Phone ○ (5 Bluetooth Phones)
Connecting Bluetooth Phone Connected Automatically*2 ○
Connected Manually*2 ○
Setting Setting Automatic Connection ○

○: Equipped


HINT:

*1: It is possible to have up to 1000 items per telephone (Bluetooth phone).

*2: Can be performed while driving.



v.

The hands-free functions of the radio receiver assembly are shown in the following table. However, for safety, some functions may not be selectable when the vehicle is being driven.

Function Outline
Calling with a Bluetooth Phone By Dialing The user can make a call by inputting a telephone number.
By Phonebook The user can make a call by using the phonebook data that has been transferred from the user's cellular phone. The user can register up to 1000 items in the contact list.
By Call History*1 Dialed Number The user can make a call by selecting a previously dialed number. The system remembers up to 10 dialed numbers. If more than 10 numbers have been dialed, the oldest number will no longer be remembered.
Received Call The user can make a call by selecting the telephone number of a received call. When a call is received, the system will remember the last 10 numbers. If more than 10 calls have been received, the oldest number will no longer be remembered.
Missed Call The user can make a call by selecting the telephone number of a missed call. The system remembers up to 10 missed call numbers. If more than 10 calls have been missed, the oldest number will no longer be remembered.
All Call History The user can make a call by selecting a telephone number from all call history. However, the number of telephone numbers in the call history that the user can use is limited while driving.
By Speed Dial*1 The user can make a call by using registered telephone numbers selected from the contact list, dialed numbers or received calls.
Receiving a Call using a Bluetooth Phone*1 When a call is received, the receive screen is displayed with a sound.
Talking on a Bluetooth Phone*1 While the user is talking on the phone, the talking screen is displayed.
Changing Bluetooth Phone Settings Speed Dial Registration The user can register a desired telephone number from the phonebook, dialed numbers or received calls. Up to 5 speed dial numbers can be registered.
Volume Settings The user can set the volume.
Phonebook Settings Transferring a telephone number: The user can transfer telephone numbers from a Bluetooth phone to the system. Up to 1000 items (up to 3 numbers per entry) can be registered in the contact list.
Deleting all the phone data:
The user can delete all the phone data.*2
Deleting the call history data:
The user can delete the call history data individually or all at once.*2
Registering and Selecting a Bluetooth Phone Bluetooth Phone Registration In order to use the hands-free function of a Bluetooth phone, it is necessary to register it to the audio head unit. Once a phone is registered, the hands-free function connects automatically. The user can register up to 5 Bluetooth phones.*3
Bluetooth Phone Selection*1 When 2 or more registered Bluetooth phones are in the cabin, it is necessary to select which phone to use to prevent the lines from being crossed. Only the selected phone is available for use as a hands-free phone. The phone registered last is automatically selected.
Deleting a Bluetooth Phone The user can delete a registered Bluetooth phone from the radio receiver assembly.

HINT:

*1: Can be operated while driving.

*2: PBAP non-compatible phone, or PBAP compatible phone with the automatic telephone number transfer function set to off.

*3: The maximum number of Bluetooth devices that can be registered (including Bluetooth phones and Bluetooth audio players).