CONSTRUCTION
Front Suspension Support Sub-Assembly and Front Coil Spring
The front suspension support sub-assembly has been adopted the construction that the support is connected in one point. As a result, a compact and lightweight construction is offered.
A pigtail type of front coil spring is used where the top and bottom diameters are different, creating a compact and lightweight construction. Lateral force reduction springs are used to control the reaction force line of the front coil spring, and reduce the bending force applied to the front shock absorber assembly. This reduces suspension friction, delivering a very comfortable ride.
Ball bearings have been adopted for the strut mounting bearings to improve steering response, as well as to reduce the feel of friction.
| *1 | Front Suspension Support Sub-assembly | *2 | Strut Mounting Bearing |
| *3 | Front Coil Spring | *4 | Front Spring Bumper |
| *5 | Front Shock Absorber Assembly | - | - |
| *a | The illustrations shown are examples only. | - | - |
Front Shock Absorber Assembly
A low-pressure N2 gas sealed front shock absorber is used to realize both driving stability and ride comfort.
A low friction piston band has been adopted. Low friction ensures responsiveness and both ends of the piston band are closed to stabilize the damping force when switching between compression and expansion. This ensures excellent ride comfort.*
*: Destination package models for Australia, New Zealand and Korea
A high response type piston valve provides damping force at very low shock absorber speeds, while also ensuring sufficient flow channel at medium and high speeds. This enhances steering response and suppresses high-frequency oscillations resulting in enhanced ride comfort.*
*: Destination package models for Australia, New Zealand and Korea
The multi-leaf type linear control valve has a structure consisting of several layered leaf valves with different diameter. Through use of the multi-leaf type linear control valve, changes in the damping force are made constant at low piston speeds, thus offering the excellent riding comfort and controllability.*
*: Destination package models except for Australia, New Zealand and Korea
| *A | Destination Package Models Except for Australia, New Zealand and Korea | *B | Destination Package Models for Australia, New Zealand and Korea |
| *1 | Oil Seal | *2 | Rebound Stopper |
| *3 | Low-pressure (N2) Gas | *4 | Oil |
| *5 | Base Valve | *6 | Multi-leaf Type Linear Control Valve |
| *7 | High Response Type Piston Valve | *8 | Piston Band |
| *a | When shock absorber speed is low. | *b | When shock absorber speed is medium or high. |
| *c | Extension Passage | *d | Compression Passage |
| *e | The illustrations shown are examples only. | - | - |
To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.