OUTLINE
Exterior Light
For the headlights, LED headlights and halogen headlights are available, and are configured according to vehicle specifications.
For the front fog lights, LED type and halogen bulb type fog lights are available, and are configured according to vehicle specifications.
Daytime Running Lights are available, and are configured according to vehicle specifications.
The stop light and tail light inside the rear combination light assembly are LED lights. The design of the stop light and tail light allows them to be changed to socket type.
An LED rear fog light is configured inside the rear combination light assembly according to vehicle specifications.
LED Headlight System (Models with LED Headlight Assembly)
LED headlights, in which a shade is provided to switch between low and high beams, are used.
An LED headlight system, capable of instantly flashing and of ensuring a long service life, is used in the low and high beam headlights.
Daytime Running Light System (Models with Daytime Running Light System)
The daytime running light system is designed to automatically illuminate the daytime running lights during the daytime to keep the vehicle highly visible to other vehicles.
Automatic Headlight Beam Level Control System (Models with LED headlight system)
When the headlights are on, the automatic headlight beam level control system operates the headlight leveling motor in accordance with movement of the vehicle.
Manual Headlight Beam Level Control System (Models with halogen headlight system)
The manual headlight beam level control system keeps the beam of the headlight adjusted.
Automatic Light Control System (Models with Automatic Light Control System)
When the light control switch is in the AUTO position, the automatic light control sensor detects the ambient light level and automatically turns the headlights, taillights, clearance lights and license plate lights on or off accordingly.
Light Reminder System
When the driver door is opened with either the headlights or the taillights turned on when the power switch is turned off, the buzzer sounds to prevent the driver from forgetting to turn off the lights.
Light Automatic Turn-off System (Models with Light Automatic Turn-off System)
The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, clearance light, front fog lights*1, taillights, rear fog light*2 or license plate lights on.
*1: Models with front fog light
*2: Models with rear fog light
Emergency Brake Signal System (Models with Emergency Brake Signal System)
The hazard warning lights flash automatically in the case of emergency braking to alert following drivers, thus helping to reduce rear-end accidents.
SPECIFICATION
| Light | Type | Specification | ||
|---|---|---|---|---|
|
*1: Models with halogen headlight system *2: Models with LED headlight system *3: Models with front fog light *4: Models with daytime running light system *5: Models with rear fog light *6: Destination package for Korea |
||||
| Headlight Assembly | Halogen Headlight*1 | High/Low Beam | Halogen Bulb | 60 W / 55 W |
| Clearance Light | Bulb | 5 W | ||
| Front Turn Signal Light | Bulb | 21 W | ||
| LED Headlight*2 | High/Low Beam | LED x 1 | 34 W / 29 W | |
| Clearance Light | LED x 3 | 1.5 W | ||
| Front Turn Signal Light | Bulb | 21 W | ||
| Front Fog Light*3 | Halogen Fog Light*1 | Halogen Bulb | 19 W | |
| LED Fog Light*2 | LED x 2 | 5.9 W | ||
| Daytime Running Light Assembly*4 | LED x 2 | 5.9 W | ||
| Side Turn Signal Light | Bulb | 5 W | ||
| LED x 1*6 | 0.5 W | |||
| Rear Combination Light Assembly | Taillight | LED x 1 | 1.1 W | |
| Stop Light | LED x 1 | 1.1 W | ||
| Turn Signal Light | Bulb | 21 W | ||
| Back-up Light | Bulb | 16 W | ||
| Rear Fog Light LH*5 | LED x 3 | 1.7 W | ||
| High Mounted Stop Light (Stop Center Light Set) | LED x 4 | 1.1 W | ||
| License Plate Light | Bulb | 5 W | ||
MAIN FEATURES
Light Emitting Diode (LED) Light
Compared to a halogen light, even if an LED is used for a long time, the reduction of brightness over its lifetime is less. In addition, there is no possibility of an LED having an open circuit because of vibration. Together, these attributes realize maintenance-free lighting.