Home › General › SPECIFICATIONS › 1NZ-FXE COOLING › 2011.12–2017.06
RM2170E _V1 General _057001 SPECIFICATIONS _0277860 1NZ-FXE COOLING F

SPECIFICATIONS  1NZ-FXE COOLING  SERVICE DATA  


THERMOSTAT
Condition Specified Condition
Standard valve opening temperature 80 to 84°C (176 to 183°F)
Standard valve lift 0.8 mm (0.315 in.) or more at 95°C (203°F)

COOLING FAN MOTOR
Item Condition Specified Condition
Cooling fan motor 20°C (68°F) at 12 V 12.2 to 15.7 A

COOLING FAN RELAY
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω

WATER FILLER CAP SUB-ASSEMBLY
Item Tester Connection Specified Condition
Water filler cap sub-assembly for brand-new cap 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi)
for used cap 78.5 kPa (0.8 kgf/cm2, 11.4 psi)