Home › Engine / Hybrid System › 1NZ-FXE (ENGINE CONTROL) › THROTTLE BODY
RM2170E _51 Engine / Hybrid System _057003 1NZ-FXE ENGINE CONTROL _0277913 THROTTLE BODY G

1NZ-FXE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A159755E21
0.307,0.259 0.475,0.422 0.168,0.163 10 *1 2.039,2.572 2.26,2.723 0.221,0.152 10 M+ 2.515,2.572 2.703,2.726 0.189,0.154 10 M- 2.217,2.102 2.14,2.537 false 2.512,2.116 2.578,2.523 false

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*1 Component without harness connected
(Throttle Body with Motor Assembly)

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body with motor assembly.