Home › Engine / Hybrid System › 1NZ-FXE (ENGINE CONTROL) › IGNITION COIL AND SPARK PLUG › 2011.12–2014.12
RM2170E _51 Engine / Hybrid System _057003 1NZ-FXE ENGINE CONTROL _0277917 IGNITION COIL AND SPARK PLUG A

1NZ-FXE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  REMOVAL  


PROCEDURE

Hide 19500D 1.REMOVE NO. 1 IGNITION COIL

a.
A267419

Disconnect the 4 No. 1 ignition coil connectors.


b.

Remove the 4 bolts and 4 No. 1 ignition coils.

NOTICE:

When removing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.



Hide 19100P 2.REMOVE SPARK PLUG

a.
A267420

Using a 16 mm spark plug wrench, remove the 4 spark plugs.