Home › Engine / Hybrid System › 1NZ-FXE (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM2170E _51 Engine / Hybrid System _057003 1NZ-FXE ENGINE CONTROL _0277920 AIR FUEL RATIO SENSOR G

1NZ-FXE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
U183171E01
0.08,0.065 0.343,0.227 0.263,0.162 10 *a 0.954,0.779 1.152,0.921 0.198,0.142 10 +B 0.836,1.237 1.129,1.546 0.293,0.308 10 C17 0.788,1.721 1.134,1.863 0.346,0.142 10 A1A- 2.303,0.787 2.706,0.929 0.402,0.142 10 HA1A 1.553,1.125 1.206,0.859 false 1.937,1.119 2.252,0.885 false 1.246,1.761 1.544,1.455 false

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Air Fuel Ratio Sensor)

Standard Resistance:
Tester Connection Condition Specified Condition
C17-1 (HA1A) - C17-2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
C17-1 (HA1A) - C17-4 (A1A-) - 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.