Home › Engine / Hybrid System › 1NZ-FXE (ENGINE CONTROL) › INTEGRATION RELAY
RM2170E _51 Engine / Hybrid System _057003 1NZ-FXE ENGINE CONTROL _0277922 INTEGRATION RELAY A

1NZ-FXE ENGINE CONTROL  INTEGRATION RELAY  REMOVAL  


PROCEDURE

Hide 82662A 1.REMOVE NO. 1 RELAY BLOCK COVER

Hide 82641 2.REMOVE NO. 1 INTEGRATION RELAY

a.
A267406

Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the No. 1 integration relay.


b.
A267407

Disconnect the 3 connectors and remove the No. 1 integration relay.