Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › RELAY
RM2170E _51 Engine / Hybrid System _057004 HYBRID / BATTERY CONTROL _0277923 RELAY G

HYBRID / BATTERY CONTROL  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85924 1.INSPECT IGCT RELAY

a.
A253297E01
0.165,0.068 0.398,0.266 0.232,0.198 10 *1

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*1 IGCT Relay

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage is not applied across terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage is applied across terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.