Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM › from 2014.12
RM2170E _51 Engine / Hybrid System _057004 HYBRID / BATTERY CONTROL _0277924 HYBRID CONTROL SYSTEM C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  P0A1D-144  Hybrid Powertrain Control Module  P0A1D-148  Hybrid Powertrain Control Module  P0A1D-162  Hybrid Powertrain Control Module  P0A1D-187  Hybrid Powertrain Control Module  P0A1D-721  Hybrid Powertrain Control Module  P0A1D-722  Hybrid Powertrain Control Module  P0A1D-723  Hybrid Powertrain Control Module  P0A1D-787  Hybrid Powertrain Control Module  P0A1D-818  Hybrid Powertrain Control Module  P0A1D-821  Hybrid Powertrain Control Module  P0A1D-822  Hybrid Powertrain Control Module  P0A1D-823  Hybrid Powertrain Control Module  


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation, it will set DTCs and perform fail-safe control when it detects the following malfunctions. If any of the following DTCs are output, replace the hybrid vehicle control ECU.

DTC No. INF Code DTC Detection Condition Trouble Area
P0A1D 144 ECU internal error Hybrid vehicle control ECU
148
162
187
721
722
723
787
818
821
822
823

CAUTION / NOTICE / HINT

HINT:

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.

1.

Turn the power switch on (IG) and wait for 30 seconds or more.



PROCEDURE

1.REPLACE HYBRID VEHICLE CONTROL ECU

NEXT

COMPLETED