If there is a malfunction in the air conditioning amplifier assembly, DTC U0424-537 will be stored.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U0424 | 537 | Air conditioning amplifier assembly malfunction | Air conditioning amplifier assembly |
After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
Wait for 1 minute or more with the vehicle stopped, the power switch on (READY), the shift lever in P, and the air conditioning system on (Lo/COOL MAX, blower speed HI).
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Enter the following menus: Body / Air Conditioner / DTC.
Check if DTCs related to the air conditioning system (A/C) are output.
| Result | Proceed to |
|---|---|
| DTCs related to A/C are not output. | A |
| DTCs related to A/C are output. | B |
Turn the power switch off.
A
B
(See pageVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM>DIAGNOSTIC TROUBLE CODE CHART)