Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM › from 2014.12
RM2170E _51 Engine / Hybrid System _057004 HYBRID / BATTERY CONTROL _0277924 HYBRID CONTROL SYSTEM C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  P060B-134  Internal Control Module A/D Processing Performance  P060B-135  Internal Control Module A/D Processing Performance  P060B-570  Internal Control Module A/D Processing Performance  P062F-143  Internal Control Module EEPROM Error  


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation and it will set this DTC when it detects an internal malfunction. If this DTC is output, replace the hybrid vehicle control ECU.

DTC No. INF Code DTC Detection Condition Trouble Area
P060B 134 ECU internal error Hybrid vehicle control ECU
135
570
P062F 143

CAUTION / NOTICE / HINT

HINT:

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.

1.

Turn the power switch off and wait for 30 seconds or more.

2.

Turn the power switch on (IG) and wait for 15 seconds or more.



PROCEDURE

1.REPLACE HYBRID VEHICLE CONTROL ECU

NEXT

COMPLETED